01 Registered Devices
Loading devices...
02 Add New Device
Loading production device template...
REQUIRED — UNIQUE PER DEVICE
Friendly name used as the preset name
Leave blank to apply to ALL new devices
PORT 1 — SIP CREDENTIALS
Your VoIP.ms sub-account username (DID number)
Number shown on outbound calls (usually same as SIP User ID)
PORT 2 — SIP CREDENTIALS
Line Type Configuration
Set each FXS port as Voice or Fax — auto-configures codecs and features
FXS Port 1:
Voice line — call waiting, caller ID, MWI enabled
FXS Port 2:
Fax line — T.38, G.711 only, call waiting disabled
⚙ Dial Plan Builder
Visual editor for 7/10/11-digit dialing, blocked numbers, N11 service codes, and number rerouting. Generates the Grandstream dial string automatically.
Allowed Dialing Formats
Check the formats you want to ALLOW. Unchecked formats will not be dialable.
When set, 7-digit dialing uses
Leave blank to allow raw 7-digit dialing (carrier may reject it).
substitution to prepend this area code before sending to the carrier.Leave blank to allow raw 7-digit dialing (carrier may reject it).
Block Numbers
Checked items will be BLOCKED using Grandstream
^ (caret) syntax.INTERNATIONAL
PREMIUM / TOLL
CARIBBEAN (NANP TOLL)
CUSTOM BLOCK NUMBERS
N11 Service Codes
Configure how each N11 code is handled: Pass-through dials the code directly, Redirect rewrites it to a custom number, Block prevents dialing.
Number Rerouting
Rewrite specific dialed numbers to a different destination. Uses Grandstream
<match=replacement> substitution syntax.Block-Out Numbers (P88 / P788)
These are blocked at the SIP layer (not the dial plan). Comma-separated patterns. Supports wildcards:
x = any digit, + = one or more.Generated Dial Plan String
PORT 1 (P52)
{ x+ | \+x+ | *x+ | *xx*x+ }
PORT 2 (P752)
{ x+ | \+x+ | *x+ | *xx*x+ }
Loading parameters...
03 Provisioning Presets
Loading presets...